Orla Intersects 158.7 Metres Grading 0.62 g/t Au and 0.62% Cu at the Cerro Quema Project, Panama

VANCOUVER, British Columbia, Nov. 30, 2017 — Orla Mining Ltd. (TSX VENTURE:OLA) (“Orla” or the “Company”) is pleased to provide an update on drilling at its wholly owned Cerro Quema project in Panama, and report continued success at the Caballito copper-gold zone. We highlight in particular diamond drill hole CQDH17-136 which intersected 158.7 metres grading 0.62 g/t Au and 0.62% Cu from 50.6 to 209.3 m depth.  Lower grade mineralization below this averaged 0.15 g/t Au and 0.17% Cu over 79.9 meters from 209.3 to 289.2 metres. A separate upper intersection graded 0.37 g/t Au and 2.24% Cu over 6.9 metres from 31.1 to 38.0 metres.
In the main 158.7 metre intersection, gold grades are fairly uniform throughout. Copper is more variable, ranging from 0.08 to 3.64%.  The best copper intercept was 29.5m @ 1.31% Cu and 0.53 g/t Au from 101.0 to 130.5 metres.  As with other holes in the Caballito zone, arsenic is at a much lower ratio to copper than in holes further to the north. CQDH17-136 was drilled at -600. A second hole, CQDH17-140, was drilled at -900 from the same pad.  This hole had a narrow section of similar Cu-Au mineralization that averaged 0.29 g/t Au and 0.47% Cu from 160.4 to 172.3 metres. An upper intersection of 2.4m @ 0.37 g/t Au and 1.13% Cu from 103.0 to 105.4 metres had high associated arsenic and thus may be unrelated to what is considered the Caballito Cu-Au Zone.CQDH17-136 was drilled 100 metres to the northwest of previously reported CQDH-17-116 which intersected 49.0m @ 0.50 g/t Au and 1.39% Cu and 55.8m @ 0.28 g/t Au and 1.99% Cu in two intercepts separated by 28.7m of low grade material.  (See News Release dated Sept. 15, 2017). Results from holes CQDH17-116, 136 and 140 suggest a north-north-west control to mineralization. Wide Cu-Au intercepts in holes CQDH17-127 and 132 located to the east of CQDH17-116 released on November 14, 2017 indicate at least some horizontal control to mineralization in that area.  Due to the wide spacing of current holes, the geometry and thus true width, of mineralization is uncertain and will require continued drilling to determine.  The potential extent of mineralization is also unknown. A hole a further 100 metres to the northwest of CQDH17-136 was recently completed and a hole to test for mineralization to depth closer to CQDH17-116 is in progress. Marc Prefontaine, Orla CEO noted, “The intersection in CQDH-17-136 really shows the potential of the Caballito Cu-Au zone.  We have a lot of work to do to figure out the geology of the area, but we now have several good intercepts.  The extent of mineralization horizontally and vertically is unknown.  This is a very exciting target and we plan to move another drill into this area early in 2018.”In addition to the drill working in the Caballito area, a second rig has been drilling in the Quemita area testing for potential extensions to depth and along strike to the reserves contained in a proposed pit outlined in the project Pre-Feasibility Study (PFS). Results from four holes in Quemita are reported herein. Hole CQDH17-137 was drilled quite far below the pit and did not intersect oxide.  Holes CQDH17-138, 139 and 141 were drilled on the western margin and to the west of the PFS pit. Oxide intersections of 16.1m @ 0.49 g/t Au in CQDH17-138 and 48.2m @ 0.20 g/t Au in CQDH17-141 show potential for some increase to resources in this area.  This drill was recently moved to test prospective targets to the north and downhill of the Quemita resource.  Once all results from the Quemita drilling have been received, a new geological model will be created and the need for any additional drilling determined.A third drill is operating to acquire material for additional metallurgical column test work.  Testing will focus on the potential for a larger crush size than in the current PFS model or placing Run of Mine material onto the proposed heap leach pad.Table of Drill Holes released on November 30, 2017

Powered by WPeMatico

You might like

About the Author: Carrie Brunner

Carrie Brunner grew up in a small town in northern New Brunswick. She studied chemistry in college, graduated, and married her husband one month later. They were then blessed with two baby boys within the first four years of marriage. Having babies gave their family a desire to return to the old paths – to nourish their family with traditional, homegrown foods; rid their home of toxic chemicals and petroleum products; and give their boys a chance to know a simple, sustainable way of life. They are currently building a homestead from scratch on two little acres in central Texas. There’s a lot to be done to become somewhat self-sufficient, but they are debt-free and get to spend their days living this simple, good life together with their five young children. Carrie writes mostly on provincial stories.
%d bloggers like this: